Home   About Us   Products   News & Events   Contact Us
 
    Home    Products    Oshima  
 
       
 
     
 
CONVEYOR TYPE NEEDLE DETECTOR

   ON-688CDII/CDDII

    
Fusing Press Machine Series

   OP-450GS/520GS

    
General Garment Machinery Series    OP-408A    OP-747/747S  
Pressing and Forming Series    OP-565III    OP-606  
 
     
  ON-688CDII/CDDII CONVEYOR TYPE NEEDLE DETECTOR  
     
 
Features

Automatic conveyor magnetic induction metal detector can detect the needle easily. And it has signaler to tell you there is some ferrous in it.

When machine is detected the needle or ferrous, the alarm will sound and the conveyor will stop. The signal light will show the position where the needle or ferrous are and will return the disqualified. It will increase the efficiency of working.
Machine equips with counter and it can accumulate the quantity of qualified.

It can adjust the sensitivity of detecting and to meet the different kind and size of detected matters in order to let you to find the needle or ferrous in your detecting products.

It adopt the newly design of trans-induction device. It can increase the product of detection and reliance
 
Model ON-688CDII ON-688CDDII
Detecting tower Single head Twin head
Voltage Single phase AC220V 50/60Hz ¡@
Rate ¡Õ140¢å 200W
Detective width(mm) 600mm¡@
Detective height(mm) 100mm ¡@
Detective capability of Iron ball (mm) £X1.0¡@
Sensitivity adjustment 1-10 Level steps¡@
Speed of conveyor 30m/min¡@
Detection method Detected by magnet¡@
Alarm Automatic buzzer and alarm lamp, the conveyor will stop or return.¡@
Dimension L*W*H(mm) 1650*1040*920 2230*900*1050
Weight (Kg) 220kg 330kg

  Download PDF Catalogue
 
 

[Back to top]

  
  OP-450GS/520GS MINI OPEN-SIDE FUSING PRESS MACHINE  
     
 
Features
Compact type that can be moved easily to any places.
Side-open style: Fit for the bigger fabrics and various sizes.
Rotary Strip-off device for strengthening the stripping off function and avoid transforming of the finished fabrics.
Equipped with the super linear guide belt to prevent the belt from warping, and extend the duration of the belt.

Equipped with the special-designed pressure mechanism to ensure the maximum pressure strength up to 1kg/¢Q².

Electronic thermostat and the special-made heating equipment minimize the temperature differences.

Use the excellent heatproof Teflon belt. This patented Teflon Belt is easy of maintenance and clean.

Use the excellent heatproof Teflon belt. This patented Teflon Belt is easy of maintenance and clean.
Powerful ventilate fan to lower the temperature of electronic components from damaging.

OP-450GSL, and OP-520GSL: L series is the longer bottom belt for more efficient work.
 
Model OP-450GS OP-450GSL OP-520GS OP-520GSL
Power Output 1 Phase,220V 1 Phase,220V 1 Phase,220V 1 Phase,220V
Rated
Output		 Heater 3.6KW 3.6KW 4.2KW 4.2KW
Motor 40W 40W 40W 40W
Max.
Temperature		 0¢J~230¢J
32¢K~440¢K		 0¢J~230¢J
32¢K~440¢K		 0¢J~230¢J
32¢K~440¢K		 0¢J~230¢J
32¢K~440¢K
Max.
Pressure		 1kgf/cm²
0.1MPa		 1kgf/cm²
0.1MPa		 1kgf/cm²
0.1MPa		 1kgf/cm²
0.1MPa
Heating Time 5~34secs 5~34secs 5~34secs 5~34secs
Fusing Width 450mm 450mm 520mm 520mm
Type of Scraper Rotary Stripe-off Rotary Stripe-off Rotary Stripe-off Rotary Stripe-off
Dimensions
(mm)		 1700*910*360 2000*910*360 1700*980*360 2000*980*360
Belt
(mm)

 

 Upper 460*1530 460*1530 520*1530 520*1530
Lower 460*1840 460*2440 520*1840 520*2440
Net Weight 135kg 145kg 160kg 170kg

  Download PDF Catalogue
 
 

[Back to top]]

  
  OP-408A SPOT REMOVING MACHINE  
     
 
Features

Vacuum Treadle switch for saving the electricity and reducing the noise while operating.
Dedicated and useful; stainless steel worktable.
Strong spray-guns for spot removing.
With two solvent reservoirs for installing different liquid solvent.

With wiggly arm for easy operation.
 
Model OP-408A
Suction 400Pa
Rated Power 0.37kw
Power Supply 1phase
Worktable Height 980mm
N.W/G.W 68/81kg
Packing volume 1045*420*1740mm

  Download PDF Catalogue
 
 

[Back to top]

  
  OP-747/747S THREAD PIECES SUCKING MACHINE  
     
 
Features

Powerful suction to clean thread, dust and dirt attached on the clothes.

With observable work-plate for operators to se the materials clearly.

Auto Stop for protection and safety.
Extra long sucking tube, low noise and easy operation.
OP-747S equips with sensor.

Standard motor sucking is 3HP but it can be replaced with big motor of 4HP according to the customers different demand.
 
Model OP-747 OP-747(s)
Suction 360m/h
Rated Power 2.2kw
Power Supply 3phase220v/380v
N.W/G.W 140/165kg
Packing Volume 920*720*1770mm

  Download PDF Catalogue
 
 

[Back to top]

  
  OP-565III Auto Pneumatic Collar Machine  
     
 
Features

This new R&D OP-565III includes the trimming and turning, pressing in one machine automatically, and reduce the operators fatigue.

Auto feeding and collecting device, which ensures the high productivity and high efficiency.

Its special pressing moulds which can be changed to fit different kinds of collar turning to sharp and smart.
Its 2 steps-pressing option, which can press all kinds of fabric perfectly.

The new design of thermostat can ensure the collar point will not polish and shine.
To exchange the different moulds of collar is very easy by the operator himself.

The volume of pneumatic air is adjustable, be set for the universal collar shapes.
To satisfy every specific demand of collar shape, it is the best and only choice for the high quality collar production.
Collar pressing, turner & trimmer, all in one.
Production quantity: 180-200 pieces per hour.
 
Model OP-565III
Power supply IP/220V
Heater 1.6KW
Pressure 5kg/c¢T
Temperature 0-180¢J
Dimensions (mm)supply 870*940*1200
Packing Volume (mm) 1030*900*1450
NW./GW. 150/190kgs

  Download PDF Catalogue
 
 

[Back to top]

  
  OP-606 PNEUMATIC CUFF PRESSING MACHINE  
     
 
Features

Can be adjusted according to the different width of the cuff size.
Shape and form the cuff at one time.
Easy for operation.
Bit is easy to form for the quadrangle, pentangle, and round cuff or the pocket overlap.
Auto feed and exit of the producing mechanical process, ensures the high productivity and efficiency.
Its production is 320~350 pieces per hour in average.
 
Model OP-606
Power supply 1/220V
Heater 1.3Kw
Supply Air Pressure 0.4-0.5Mpa
MAX. Temperature 180¢J
Net Weight 125/170kg
Dimensions (mm) 830*650*1470mm

  Download PDF Catalogue
 
 

[Back to top]

  
     
Copyright © 2008. Focus Garment Tech Pte. Ltd. All rights reserved.